Residential & Commercial Roofing in Smith Lake
Roof repairs, full replacements, storm damage, gutters, metal roofing, flat roofs. Smith Lake Roofing & Maintenance covers it all in Smith Lake. Licensed, insured, manufacturer-certified.
Roof Replacement
After tear-off, we always check decking and replace what's needed. Soft spots mean moisture intrusion. The old roof was leaking longer than you realized. We use 7/16" or 15/32" CDX plywood depending on rafter spacing. New decking costs $75-$120 per sheet installed. We only replace what's actually damaged.
Get a Free Quote →Roof Repair
Our roof repair process: inspect the issue, identify the root cause, quote the fix, do the work, warranty the repair. Simple. If the root cause is widespread (poor ventilation causes ice dams, for example), we'll recommend addressing that too. But the choice is always yours.
Get a Free Quote →Storm Damage Repair
Wind damage and hail damage look different and require different documentation. Our HAAG-trained inspectors know what adjusters look for: granule displacement patterns, fractures in the shingle mat, seal failures, cracked ridge caps. Proper documentation is why our claims get approved.
Get a Free Quote →New Roof Installation
Building a custom home in Smith Lake? We work directly with you and your architect on material selection, color coordination, and budget planning. From designer shingles to standing seam metal, we install it all and back it with manufacturer plus workmanship warranties.
Get a Free Quote →Metal Roofing
Metal roofing reflects solar heat instead of absorbing it. In New Mexico, that means 15-25% lower cooling costs compared to dark asphalt shingles. The higher upfront cost pays for itself over the life of the roof. And the life of a metal roof is twice or three times longer than shingles.
Get a Free Quote →Shingle Roofing
The difference between a cheap shingle roof and a quality one comes down to the system underneath. Shingles are only the outer layer. Ice and water shield in the valleys, synthetic underlayment across the deck, proper starter strip with factory adhesive, correct nailing pattern. That's what makes a shingle roof last in New Mexico's weather.
Get a Free Quote →Flat Roofing
EPDM (rubber roofing) has a 50+ year track record as a flat roofing membrane. We install fully adhered EPDM with taped or glued seams over polyiso insulation. It's a great option for Smith Lake building owners who want proven performance at a lower cost than TPO or PVC.
Get a Free Quote →Commercial Roofing
Multi-family properties in Smith Lake need roofing contractors who understand occupied buildings. We schedule around tenants, contain debris, and minimize noise during reasonable hours. Emergency leak repairs get priority. Water in someone's apartment is an emergency.
Get a Free Quote →Gutter Installation
We hang gutters with hidden hangers screwed into the rafter tails or fascia board every 24 inches max. No spike-and-ferrule, no exposed hardware. Proper pitch is 1/4" per 10 feet toward each downspout. Too flat and water sits. Too steep and it looks wrong.
Get a Free Quote →Roof Inspection
After a storm, our inspection documents hail hits, wind damage, lifted shingles, and cracked components for your insurance claim. We take measurements, count damage per test square, and prepare a report your adjuster can use. Free for Smith Lake homeowners. We only charge if you hire us for the repair.
Get a Free Quote →Emergency Roof Repair
Emergency protocol for active water intrusion: (1) interior containment. Buckets, plastic sheeting, water extraction if accessible, (2) exterior tarping with 20x30 heavy-duty poly sheeting over damaged area extending minimum 4 feet past damage on all sides, (3) secure with 2x4 nailer boards lag-screwed to the roof deck (not through shingles), (4) secondary tarp overlap for multi-section damage, (5) document with timestamped photos for insurance. Permanent repair scheduled within 48-72 hours once materials are sourced.
Get a Free Quote →Skylight Installation
Skylight replacement on existing curbs: VELUX FCM curb-mount units install directly on the existing curb frame. No structural modification, no interior disruption. The FCM sits on the curb with a built-in sill pan and integrates with a new QCM flashing kit. Low-E4 laminated glass with argon fill provides R-value improvements over older skylights. Solar-powered blinds and venting available on VSS models. The 10-year No Leak Installation Warranty requires VELUX-certified installation with the complete flashing system. We're certified in Smith Lake.
Get a Free Quote →